|
|
Post by bbh on Dec 11, 2017 15:57:42 GMT
I have a MG Lubrication Chart for my MGA .. similar to ....  Is there a similar chart available for the Healey 3000 series? Its might be that I just haven't found it, which is quite possible. The nearest I have seen is either the double page in the Owners handbook or a not very good graphic on Irish e-b. |
|
|
|
Post by josefeckert on Dec 11, 2017 18:44:54 GMT
There is one for an Austin-Healey 3000. I have it on the garage wall. Its also from CASTROL. Will make a copy and post it tomorrow.
|
|
bn6
Junior Member
Once a BT-7 Owner, now a BN6 100/6 Owner
Posts: 89 
|
Post by bn6 on Dec 12, 2017 14:22:24 GMT
There is one for an Austin-Healey 3000. I have it on the garage wall. Its also from CASTROL. Will make a copy and post it tomorrow. Hi josefeckert, any chance of you copying one for me as well ? |
|
|
|
Post by Admin on Dec 12, 2017 14:40:03 GMT
|
|
|
|
Post by josefeckert on Dec 12, 2017 18:54:57 GMT
Attached a picture. Its from ESSO not CASTROL as I thought. Hope its good enough to make a copy yourself. Its DIN A3, so I can´t put it on the scanner.  |
|
|
|
Post by bbh on Dec 12, 2017 20:08:50 GMT
Josef, many thanks, I sense a Christmas Hols project coming on ........
If I get any-where I'll post the results.
Andy
|
|
|
|
Post by bbh on Dec 19, 2017 20:40:53 GMT
Initial attempt - Version 1. ( Please bear in mind that I am no graphic artist !!!! )  Initial thoughts are that :1. It is a little too modern - needs to feel more 60'ish 2. The schematic shows a LHD (which is what is in the drivers handbook - well copy I have) but I would have preferred a RHD. |
|
|
|
Post by bbh on Dec 30, 2017 17:38:18 GMT
So, thinking about what a CASTROL chart would look like ( I am sure there must be one around somewhere, just haven't come across it yet ) I had a play about, converted the graphics to show a RHD and .....  and with the small additional info box, which they all seem to have ....  |
|
