|
Post by bbh on Feb 28, 2021 16:22:45 GMT
Folks, New door skins fitted which is great but unfortunately I don’t have the hole in the front top for the sidescreen leg to fit through. I still have the cut-out on the inner frame below, but I am hoping to drill once! Re the diagram below, would any-one have the sizes for dimensions A and B so hopefully I can position accurately.
|
|
|
Post by bbh on Mar 8, 2021 19:46:29 GMT
Unsurprisingly feedback from a number of cars indicates slight differences in the measurements. However these may help any-one else looking to do this ...
A : Average 68mm, B : Average 111mm,
However to be sure, best to line up with the sidescreens before drilling.
|
|