Post by bbh on Apr 2, 2021 19:42:09 GMT
The attached video from Geoff Chrysler gives a good overview of the progress / changes in interior trim panels from the 100, through to the last BJ8's
For any-one fitting these, you can either drill new holes (panel and door) and get them nice and straight, or use the original factory holes in the door and transcribe these onto the panels - not easy!, However at around the 8:50 mark in the video Geoff shows a smart / simple tool made from Meccano strips, to make this easier.
For any-one fitting these, you can either drill new holes (panel and door) and get them nice and straight, or use the original factory holes in the door and transcribe these onto the panels - not easy!, However at around the 8:50 mark in the video Geoff shows a smart / simple tool made from Meccano strips, to make this easier.